๐ท๏ธ Carburetor Cleaner Spray - 450 ml
๐ง Practical carburetor cleaning and removal of dirt deposits
โจ Carburetor cleaning spray in a 450 ml container
The Carburetor Cleaner Spray - 450 ml is a product designed for the maintenance and cleaning of carburetor components, helping remove dirt deposits and residues accumulated during engine operation.
The cleaning formula is intended for use on carburetor surfaces and components compatible with this type of product, helping maintain their cleanliness.
The spray container allows direct and controlled application to areas requiring cleaning, according to the manufacturer's instructions.
Key features:
โ๏ธ Carburetor cleaning โ designed to remove dirt and deposits
โ๏ธ 450 ml container โ practical size for maintenance
โ๏ธ Spray application โ facilitates product distribution
โ๏ธ Mechanical maintenance โ suitable for carburetor cleaning operations
โ๏ธ Targeted application โ allows cleaning of accessible areas requiring attention
๐ฆ Package contents
1 ร Carburetor Cleaner Spray - 450 ml
โ ๏ธ Usage and safety recommendations
Use the product only according to the instructions on the packaging.
Switch off the engine and allow it to cool before application, unless the manufacturer explicitly specifies a different procedure.
Use the spray in a well-ventilated area.
Avoid contact with eyes and skin, and avoid inhaling vapors or aerosols.
Do not spray near flames, sparks or hot surfaces.
Protect electrical components, painted surfaces, seals and materials sensitive to solvents.
Check product compatibility with the materials to be cleaned.
Do not puncture or burn the container, even after use.
Store the product away from heat sources and out of reach of children.
Follow the warnings and hazard pictograms displayed on the product label.
Important: The chemical composition, hazard classification and exact compatibility must be checked on the original label and in the product's Safety Data Sheet (SDS).
๐ง Technical specifications
Feature | Details |
|---|---|
Product type | Carburetor cleaner spray |
Volume | 450 ml |
Product format | Spray |
Application | Carburetor cleaning |
Application method | Spraying |
Intended use | Mechanical maintenance and cleaning |
Compatibility | Components and surfaces compatible with the product |
Chemical composition | Not specified in the available information |
๐ Compatibility and instructions for use
The spray is intended for cleaning carburetors, subject to the manufacturer's instructions regarding compatible materials and components.
General application recommendations:
Switch off the engine and ensure the work area is safe and well ventilated.
Identify the carburetor components requiring cleaning.
Protect parts and surfaces sensitive to cleaning agents.
Apply the spray according to the instructions on the container.
Follow the manufacturer's recommended contact time and residue removal procedure.
Before restarting the engine, ensure that cleaning is complete and any flammable vapors have dispersed.
Warning: Do not use the product on components or materials for which compatibility has not been confirmed by the manufacturer.
๐ Why choose the Carburetor Cleaner Spray - 450 ml?
The spray provides a practical solution for carburetor maintenance and cleaning, allowing targeted application to accessible surfaces.
The 450 ml container offers a convenient format for maintenance operations, while spray application makes it easier to reach areas requiring cleaning.
๐ Order now
Choose the Carburetor Cleaner Spray - 450 ml for maintenance operations and the removal of dirt deposits.
A practical product for cleaning carburetor components when used according to the manufacturer's instructions.
โ Frequently Asked Questions (FAQ)
1. What is carburetor cleaner spray used for?
It is designed for cleaning carburetors and removing dirt deposits and residues from compatible components.
2. How much product does the container hold?
The container holds 450 ml of product.
3. Can it be used on any type of carburetor?
Compatibility depends on the carburetor's materials and components. Check the manufacturer's recommendations before application.
4. Can it be applied to a hot engine?
Do not apply the product to hot surfaces or near ignition sources. Follow the specific instructions on the packaging.
5. Can it damage seals or plastic components?
Some cleaning products may affect materials sensitive to solvents. Check compatibility and protect vulnerable components.
6. Is carburetor disassembly necessary?
The procedure depends on the area requiring cleaning and the manufacturer's instructions. Complete internal cleaning may require disassembly.
7. How should the spray be stored?
Store in a cool, well-ventilated place, away from sunlight, heat and ignition sources, according to the instructions on the container.
๐ท๏ธ Carburetor Cleaner Spray - 450 ml
Carburetor cleaning spray in a 450 ml container. Designed to remove dirt deposits and residues from compatible carburetor components. Practical spray application for mechanical maintenance operations. Use according to the instructions on the packaging.
๐ต Cash Payment in Store
You can pay in cash directly at the Cridem store, in RON, in full, when picking up your products.
This payment method is available only for orders collected personally from our store in Oradea.
๐ Cash on Delivery (Courier Payment)
When choosing cash on delivery, you pay the total value of your order directly to the courier upon receiving the package.
The fiscal invoice is included inside the parcel.
๐ณ Online Payment by Card
Fast, secure, and convenient โ you can pay online using your personal or company credit/debit card through the euplatesc.ro platform.
Accepted cards: VISA (Classic, Electron) and MASTERCARD.
For transaction security:
โ๏ธ Payments are processed directly on EuPlatescโs secure servers.
โ๏ธ Cridem does not collect or store any card details.
โ๏ธ Card authorization is performed exclusively through the EuPlatesc payment gateway, using SSL encryption.
๐ฆ Bank Transfer (Wire Payment)
You can also pay via bank transfer, directly from your bank account to Cridemโs account.
After placing your order, you will receive a proforma invoice containing all necessary payment details.
The order will be processed once the payment is confirmed.
CRIDEM IMPEX SRL โ Banking Details:
๐ฆ Bank: Transilvania Bank โ Oradea Branch
๐ณ IBAN: RO85BTRL00501202733692XX
๐ Beneficiary: SC CRIDEM IMPEX SRL
๐ Order Delivery
Orders placed on our webshop are delivered through several partner courier companies, the complete list of which will be displayed during the checkout process.
Shipping costs are automatically calculated at the time of order completion, allowing you to see the exact delivery feebefore confirming your purchase.
The delivery price depends on the distance to destination, the weight of the package, and the chosen courier service. Depending on your location and selected courier, delivery times may vary slightly.
Our goal is to provide fast and reliable delivery services, ensuring that your products reach you safely and in the shortest possible time.
1. What is carburetor cleaner spray used for?
It is designed for cleaning carburetors and removing dirt deposits and residues from compatible components.
2. How much product does the container hold?
The container holds 450 ml of product.
3. Can it be used on any type of carburetor?
Compatibility depends on the carburetor's materials and components. Check the manufacturer's recommendations before application.
4. Can it be applied to a hot engine?
Do not apply the product to hot surfaces or near ignition sources. Follow the specific instructions on the packaging.
5. Can it damage seals or plastic components?
Some cleaning products may affect materials sensitive to solvents. Check compatibility and protect vulnerable components.
6. Is carburetor disassembly necessary?
The procedure depends on the area requiring cleaning and the manufacturer's instructions. Complete internal cleaning may require disassembly.
7. How should the spray be stored?
Store in a cool, well-ventilated place, away from sunlight, heat and ignition sources, according to the instructions on the container.
